Kategórie
- Chladiarenske
- Drevoobrábacie
- Firmy na predaj
- Kamenárske
- Kompresory, nástroje
- Kovoobrábacie
- Manipulačná technika
- Motory
- Nadzásoby
- Nákladne automobily
- Nástroje
- Osobne autá N1
- Papierenske
- Plastové technologie
- Poľnohospodárske
- Potravinárske
- Praca
- Roboty
- Sklárske technologie
- Stavebné
- Textilné
- Tlačiarenske
- Voľná kapacita
- Všetky
19.450 €
Double-head station for drilling holes for imposts in frames WS402
The equipment is used for fast and high-precisiondrilling holes for the central screw for fastening the impost
in frames. This station allows you to completely avoid mistakes
when drilling holes for the mechanical connector of the impost,
since drilling is done on an already welded structure
and in fully automatic mode, which minimizes
influence of the human factor on the process.
https://www.youtube.com/watch?v=P2PDQWciH7M&t=5s
+380931776448
18.200 €
Automatic station for cutting window sills WS1001
Unique center for cutting window sillsautomates this process as much as possible, the operator
All that remains is to lay the window sill on the machine and remove
cut window sill. Grab feeds window sill
to the saw and a cut of the required size is made, after which
A label is printed to mark the part.
The productivity of this center is 5 window sills per minute.
https://www.youtube.com/watch?v=Hsfs8_gCF2Q&t=66s
+380931776448
7.150 €
Automatic positioner for mounting strikers WS301
The equipment is designed to install elementsfittings for the frame and impost before welding. Thanks to
automatic operation of the unit occurs
not only performance improvements and optimization
jobs, but also improves the quality of work performed,
which has a positive effect on the image of any enterprise
https://www.youtube.com/watch?v=ItTrWhsnizg&t=110s
+380931776448
7.150 €
Automatic positioner for mounting strikers WS301
The equipment is designed to install elementsfittings for the frame and impost before welding. Thanks to
automatic operation of the unit occurs
not only performance improvements and optimization
jobs, but also improves the quality of work performed,
which has a positive effect on the image of any enterprise
https://www.youtube.com/watch?v=ItTrWhsnizg&t=110s
+380931776448
10.100 €
Spacer saw with digital measuring system WS1080
The machine is equipped with sensors for automatic transition to the next size, which significantly increases operator productivity and significantly reduces the number of shortages of finished products compared to manual mechanisms. The emphasis is driven by innovative softwaresoftware, and the system memory can accommodate unlimited amount of optimization.
https://www.youtube.com/watch?v=70fzNVCxGnA&t=82s
+380931776448
6.200 €
Automatic measuring stop WSU 3000
Availability of special sensors allows you to automate the process of moving to the nextsize. This increases operator productivity and reduces
the amount of shortage of finished goods. The emphasis is activated by
innovative software, and the amount of system memory
allows you to include an unlimited number of optimizations.
https://www.youtube.com/watch?v=afaay9-DXK8&t=63s
+380931776448
25.900 €
Automatic guillotine for cutting metal WS 7050
The equipment is designed for cutting metal. This station is approvedreinforce parts parallel to the deckhouse. Replaces one person.
Production increases speed and reduces the cost of the final product
product. Automatic recognition of the location of the cut. Station
transforms the “dirty stage of production” into a process accessible to
female labor. Eliminates defects and optimizes course production time.
products.
https://www.youtube.com/watch?v=cvkQ7YrCkCg&t=10s
+380931776448
25.900 €
Automatic guillotine for cutting metal WS 7050
The equipment is designed for cutting metal. This station is approvedreinforce parts parallel to the deckhouse. Replaces one person.
Production increases speed and reduces the cost of the final product
product. Automatic recognition of the location of the cut. Station
transforms the “dirty stage of production” into a process accessible to
female labor. Eliminates defects and optimizes course production time.
products.
https://www.youtube.com/watch?v=cvkQ7YrCkCg&t=10s
+380931776448
15.200 €
Door hinge hole drilling center in frame and sash with metal WS503
The center for drilling holes for door hinges in frame and sash with metal is designed for drilling holes for hinges together with reinforcement in door frames and sashes of different sizes, types and series of profiles, without using tape measure, pencil and templates.https://www.youtube.com/watch?v=-AZTbuUAkfw&t=52s
https://www.youtube.com/watch?v=uWmkcB5LiEk
+380931776448
15.800 €
Automatic Double Head Screwdriver WS208
Easy and convenient setting of self-drilling steps for both modes, which ensures the appropriate quality of the product.Automation of the process allows one operator instead of two to perform the required amount of work. There is a possibility of scanning the workpiece to identify areas where it is prohibited to screw in the self-tapping screw.
https://www.youtube.com/watch?v=a0tCdxVdp_c&t=2s
+380931776448
16.900 €
Automatic sandwich panel cutting stand WS8800
The stand makes the cutting process automated: cutting maps, installation and fixation of the sandwich on the stand, starting the cutting procedure by pressing the pedal. This makes it possible to process different workpieces, get a clean and even cut edge, minimize waste.https://www.youtube.com/watch?v=X1UXekF74ow
+380931776448
18.200 €
Sash hole milling center for lock and handle with metal WS707
Milling center for lock and handle holes in the sash allows you to forget about the use of machining centers and manual labor.The use of quality technologies ensures the wear resistance of locks and prevents their further rusting. Automation of processes allows to provide high accuracy of milling and significantly speeds up the work in this part of production. speeds up the work in this area of production.
https://www.youtube.com/watch?v=VliOasfnkG8&t=381s
+380931776448
7.940 €
Automatic double-head guillotine WS G3
Automatic double-headed guillotine performs automatic chopping of fittings according to the task.Marking and chopping of hardware is made according to the set program, which saves time and optimizes this section of production. Automated control system performs optimization of workplaces and allows to speed up the process of production in this area. production process in this area.
https://www.youtube.com/watch?v=E8g1o6qccwA&t=46s
https://www.youtube.com/watch?v=srcnApe8_HM
+380931776448
89.500 €
Predám: nový vstrekolis ENGEL Victory 860/160
Predáme úplne nový vstrekolis ENGEL Victory 860/160, rok výroby 2019. Má najazdených 0 hod! Súčasťou stroja sú aj periféria sušička, temperačka, podávač + ďalšie (Piovan). Technické informácie a detailné foto môžeme zaslať na vyžiadanie.Stroj je umiestnený v Bardejove.
Cena dohodou.
Meno: Mária Rešovská
Telefón: 0917 88 17 87
38.000 €
Stroje na výrobu plastových okien
Predám linku na výrobu plastových okien a dverí.Komplet linka: Elumatec, Aluma, Murat4-hlavá zváračka s CNC začisťovačom, dvojhlavé píly 2ks, jednohlavá zváračka 3ks, zasklievací stojan 2ks, kovacie stoly 4ks, kompresor 2ks, fréza na stĺpiky 2ks,fréza na odvodnovacie drazky 1ks, fréza na klučky 2ks, píla na zasklievacie lišty 2ks, stojany na profily 6ks, začisťovač zvarov 3ks, skrutkovanie výstuh 1ks ...Cena 38000 €
Jojo SK
+421901920280
Reklama