Kategórie
- Chladiarenske
- Drevoobrábacie
- Firmy na predaj
- Kamenárske
- Kompresory, nástroje
- Kovoobrábacie
- Manipulačná technika
- Motory
- Nadzásoby
- Nákladne automobily
- Nástroje
- Osobne autá N1
- Papierenske
- Plastové technologie
- Poľnohospodárske
- Potravinárske
- Praca
- Roboty
- Sklárske technologie
- Stavebné
- Textilné
- Tlačiarenske
- Voľná kapacita
- Všetky
19.800 €
Automatic milling center for aluminum profiles WS710
Automatic milling center for aluminum profiles allows you to forget about the use of machining centers and manual labor. And given the complexity of processing aluminum compared to metal, automation of this area will allow reduce the amount of scrap and speed up the milling process by 5-7 times.The use of high-quality technologies ensures wear resistance of locks and prevents their further rusting.
https://www.youtube.com/watch?v=DacT4EZmywg&t=4s
+380931776448
6.200 €
Automatic measuring roller conveyor WSR3000
The automatic measuring roller conveyor allows you to buildminimize the number of errors and significantly speed up the process setting the length and cutting of material on the selected type profile.
The machine is equipped with sensors for automatic transition to next size, which greatly increases operator productivity and significantly reduces the number of shortages of finished products compared
with manual mechanisms.
https://www.youtube.com/watch?v=afaay9-DXK8&t=63s
+380931776448
11.400 €
Automatic feed roller table with skidder WSR7001
What if this process can be optimized to achieve maximumaccuracy and simplicity for the employee? The sawing center carries out sawing of PVC profiles in an easy-to-control automatic mode. The profile is fed using a CNC clamp
management. The drive is carried out by a servomotor. Linear
The working movement of the clamp occurs through the rack
and gear, which allows you to achieve maximum dimensional accuracy.
https://www.youtube.com/watch?v=6CUsf9Nn5us
+380931776448
22.450 €
Automatic screwing center for fittings WS 910
Automation of the process of screwing fittings allowsincrease installation speed by 2 times.
The automatic screwing center for fittings allows
increase the production volume of sashes through automation
the process of screwing fittings.
The sash is tied with fittings manually by the operator,
after which the screwing process occurs automatically with
three sides in accordance with previously specified dimensions. After
which causes an automatic transition to the next size.
+380931776448
32.950 €
Logistics warehouse for business glass remains WS700
The logistics composition of business glass remains is a modular cassette composition.type of glass storage.
Compact modular glass storage system designed for
placement of sheet glass. It is simple and convenient
use, as well as high load-bearing capacity.
Separately, it is possible to equip a mobile inclined
trolley for loading and unloading glass from cells.
https://www.youtube.com/watch?v=5ji7BxpLnI0&t=3s
+380931776448
34.400 €
Frame processing center after welding WS550
Optimization and rational use of frame cooling timeallows you to reduce the load on other areas of production by 2 times.
The frame machining center after welding is used for optimization.
cooling process
During the cooling process, all necessary
drainage holes in the frame (drainage, compression and drilling for
impost) Thus, the cooling process is optimized, which allows
use this time more efficiently, speed up production
and further optimize the number of jobs.
+380931776448
15.900 €
Station for installing strikers and drilling for mullions before welding WS505
Station for drilling holes for imposts before welding with markingsfor answers includes two processes: drilling for an impost
before welding and installation of counter plans. Drilling for impost
occurs already in the beam reinforced with metal,
after processing the workpiece on this equipment
significantly speeds up the assembly of the impost and the hanging of fittings
on the window. There is also positioning along two axes
X and Y depending on profile type.
+380931776448
6.350 €
Automatic single-head guillotine WSG1
In many industries, the process of cutting accessories is still not is automated, resulting in the operator spending a lot of time to find fittings and cut them to size.Automatic single head guillotine performs automatic cutting
accessories, according to the task. Marking and felling fittings occurs according to a given program, allowing save time and optimize this production area.
https://www.youtube.com/watch?v=srcnApe8_HM
+380931776448
14.850 €
Station for drilling holes for imposts in frame WS401
With the help of the station, drilling is carried out on an already welded one. designs and in automatic mode.This helps reduce the impact human factor in the process. This makes it impossible for errors to occur.
due to manual measurement with a tape measure of the places where the holes converge
and accordingly reduces the amount of shortages in a given production area.
https://www.youtube.com/watch?v=RWJoMUB1zco&t=29s
+380931776448
19.450 €
Double-head station for drilling holes for imposts in frames WS402
The equipment is used for fast and high-precisiondrilling holes for the central screw for fastening the impost
in frames. This station allows you to completely avoid mistakes
when drilling holes for the mechanical connector of the impost,
since drilling is done on an already welded structure
and in fully automatic mode, which minimizes
influence of the human factor on the process.
https://www.youtube.com/watch?v=P2PDQWciH7M&t=5s
+380931776448
18.200 €
Automatic station for cutting window sills WS1001
Unique center for cutting window sillsautomates this process as much as possible, the operator
All that remains is to lay the window sill on the machine and remove
cut window sill. Grab feeds window sill
to the saw and a cut of the required size is made, after which
A label is printed to mark the part.
The productivity of this center is 5 window sills per minute.
https://www.youtube.com/watch?v=Hsfs8_gCF2Q&t=66s
+380931776448
7.150 €
Automatic positioner for mounting strikers WS301
The equipment is designed to install elementsfittings for the frame and impost before welding. Thanks to
automatic operation of the unit occurs
not only performance improvements and optimization
jobs, but also improves the quality of work performed,
which has a positive effect on the image of any enterprise
https://www.youtube.com/watch?v=ItTrWhsnizg&t=110s
+380931776448
7.150 €
Automatic positioner for mounting strikers WS301
The equipment is designed to install elementsfittings for the frame and impost before welding. Thanks to
automatic operation of the unit occurs
not only performance improvements and optimization
jobs, but also improves the quality of work performed,
which has a positive effect on the image of any enterprise
https://www.youtube.com/watch?v=ItTrWhsnizg&t=110s
+380931776448
10.100 €
Spacer saw with digital measuring system WS1080
The machine is equipped with sensors for automatic transition to the next size, which significantly increases operator productivity and significantly reduces the number of shortages of finished products compared to manual mechanisms. The emphasis is driven by innovative softwaresoftware, and the system memory can accommodate unlimited amount of optimization.
https://www.youtube.com/watch?v=70fzNVCxGnA&t=82s
+380931776448
6.200 €
Automatic measuring stop WSU 3000
Availability of special sensors allows you to automate the process of moving to the nextsize. This increases operator productivity and reduces
the amount of shortage of finished goods. The emphasis is activated by
innovative software, and the amount of system memory
allows you to include an unlimited number of optimizations.
https://www.youtube.com/watch?v=afaay9-DXK8&t=63s
+380931776448
Reklama